Drum type gear coupling-TAG-Botou ever-power coupling Co., Ltd.

  • Clamping spline plum blossom elastic couplingClamping spline plum blossom elastic couplingClamping spline plum blossom type elastic coupling...
  • JSZ type brake wheel couplingJSZ type brake wheel couplingJSZ type with brake wheel coupling...
  • Tire coupling for LLB metallurgical equipmentTire coupling for LLB metallurgical equipmentTire coupling for LLB metallurgical equipment...
  • UL tire couplingUL tire couplingUL tire coupling is a high elastic...
    • current position:HOME > TAG label home > "Drum Gear Coupling" TAG List
  • Applicable environment of diaphragm coupling and installation of plum blossom couplingRelease Date: 2020-12-29

    The diaphragm coupling consists of two halves of the coupling and the stainless steel coupling diaphragm in the middle. The principle is to adjust the misalignment of the two couplings through the three-dimensional deformation of the stainless steel diaphragm.

  • The problem solution of the coupling and the operation problem of the pump couplingRelease Date: 2020-12-25

    The axial displacement of the gear ring of the coupling is large, even unable to mesh.

  • The fixing method of the stainless steel coupling diaphragm and the considerations of the plum blossom coupling selectionRelease Date: 2020-12-21

    Separate type: It is a fully separated shaft sleeve, which can be fixed and disassembled without moving equipment.

  • Types of couplings and local structure of diaphragm elastic couplingsRelease Date: 2020-12-17

    Couplings are also called couplings.A mechanical component used to connect the driving shaft and the driven shaft in different mechanisms to rotate together and transmit motion and torque.

  • Alignment plan of pump coupling and inspection items of couplingRelease Date: 2020-12-13

    Observe the reading of the axial dial gauge first, tap the front and rear feet of the movable end with a copper rod, and adjust the axial reading at 3 o'clock to half of the original.

  • The size analysis of the coupling diaphragm and the maintenance method of the drum-shaped gear couplingRelease Date: 2020-12-09

    In order to facilitate the installation, it is good to put the two half couplings in the 120-150 incubator or oil tank for preheating, so that the inner hole size increases and it is easy to install.

  • Alignment method and installation points of elastic couplingRelease Date: 2020-12-05

    Fix the outer foot on the side of the motor of the lifting accessories coupling, and move the inner foot until the eccentric line between the motor and the pump center is zero.In order to ensure that the motor does not move arbitrarily, after fixing the feet of one side of the motor, the other side should be supported by the top wire.

  • Precautions and structure of diaphragm coupling processingRelease Date: 2020-11-30

    The whole machine has few parts, small size and light weight. The spring leaf designed as a trapezoidal cross-section and the trapezoidal tooth groove are particularly convenient and close, so that the assembly, disassembly and maintenance are simpler than ordinary couplings.