Clamping spline plum blossom elastic couplingClamping spline plum blossom type elastic coupling...
JSZ type brake wheel couplingJSZ type with brake wheel coupling...
Tire coupling for LLB metallurgical equipmentTire coupling for LLB metallurgical equipment...
UL tire couplingUL tire coupling is a high elastic...Process the inner side of the right half coupling into a "fancy" stop pin structure.That is, a groove is machined inside the flange.The groove is located at the circumferential diameter of the flange hole, with a width of 4 mm and a depth of 8 mm.
The technical level of the coupling, whether it is structural type or technical parameters and performance indicators, most of them reach the level of similar products; but there is a big gap in product processing accuracy, quality and service life.
The diaphragm coupling compensates the relative displacement of the two shafts connected by the elastic deformation of the diaphragm. It is a high-performance flexible coupling with metal elastic elements. It does not require lubrication, has a compact structure, long service life, and no rotation. The gap is not affected by temperature and oil pollution.
The coupling is not allowed to have more than the specified shaft center line skew and radial displacement, so as not to affect its transmission performance.
The correct method of installing bolts for diaphragm coupling: insert the bolt from the outside of the small hole of the flange, and then pass it into the diaphragm hole (pay attention to the direction of the diaphragm, the diaphragm is composed of many single sheets, rivets and rivet washers, rivets The gasket should be in contact with the buffer sleeve, otherwise it will affect the service life of the rivet set).
The positioning taper hole of the elastic pin gear coupling plays a role in positioning the pin bolt, so the matching part of the taper hole should be carefully checked.
The coupling of a wind turbine is mainly used to transmit power, but it has relatively good requirements for transmission accuracy.
The function of the yaw system is simply to drive the wind wheel to track the wind direction, try to make the wind direction perpendicular to the sweeping surface of the wind wheel, and improve the wind wheel's ability to catch wind.