HL nylon rod pin coupling

HL nylon rod pin coupling has good toughness, strong strength, oil resistance, shock resistance, good tensile strength, good bending strength, low water absorption, good dimensional stability, etc., so it is used to process various parts.

This kind of pin coupling is fixed with 12 nylon rod pins (placed in the red circle in the figure) between the sleeve and one side of the coupling, and there are 24 on both sides.Now nylon pins are often damaged by squeeze deformation. Is there any way to improve the lower coupling to reduce the wear of the pins?Later, the workshop reported that the temperature of the coupling was very high and had to be cooled with water. The reason for the high temperature was not clear.It may be the hot air blowing from the motor, or the heat of the motor is transferred through the shaft.HL nylon rod pin couplingSuitable for making zeroParts, transmission structural parts, household appliances parts, automobile manufacturing parts, screw preventive mechanical parts, chemical machinery parts, chemical equipment.Such as turbines, gears, bearings, impellers, cranks, dashboards, drive shafts, valves, blades, screw rods, high-pressure washers, screws, nuts, seals, shuttles, sleeves, bushing connectors, etc.HL nylon rod pin coupling products are widely used. They are good materials that replace steel, iron, copper and other metals with plastics. They are important engineering plastics. Cast nylon widely replaces parts of mechanical equipment and replaces copper and alloys as equipment.