LTZ elastic sleeve pin coupling with brake wheelLTZ (formerly TLL type) with brake wheel elastic sleeve pin...
T type plum blossom hexagonal water pump counter wheel padT-shaped plum blossom hexagonal water pump for wheel pad products...
JAI large flange frame <69 standard>, JAII <69 standard> frameThe JAI large flange frame itself has no shaft support...
GLF roller chain couplingGLF roller chain coupling is suitable for hydraulic machinery...
SWP-B type has telescopic short universal couplingDue to manufacturing, installation, load deformation and...The plum coupling is driven by squeezing and the slider coupling is driven by shear.It also squeezes to make the plum elastic spacer and the shaft sleeves on both sides coincide, so as to realize the connection of the two halves of the slider coupling.
The protective device of the plum blossom coupling is usually provided by the buyer.Therefore, this part of the content does not belong to the requirements of the coupling.The buyer or contractor shall specify the type of protective device required.In addition, purchase goods are produced.
The tooth tip of the external gear sleeve of the drum-shaped gear coupling is processed into an arc, that is, the tooth blank is processed into a spherical surface. In the section of the tooth center plane and tangent to the pitch cylinder surface, the teeth form a drum shape. The so-called drum-shaped coupling Shaft.
Flexible pin coupling manufacturers have learned that couplings are now more and more used in machines controlled by servo systems, such as machine tools and semiconductor systems.
LMZ-ⅡPlum-shaped elastic coupling with brake wheel is processed by machining methods such as turning, milling, and broaching, and then subjected to group heat treatment to ensure sufficient strength.
The SL cross slider coupling is composed of two semi-SL cross slider couplings with grooves on the end faces and an intermediate disk with convex teeth on both sides.Because the convex teeth can slide in the groove, the relative displacement between the two shafts during installation and operation can be compensated.
The common characteristics of metal elastic components are fatigue, large carrying capacity, good load-bearing capacity, long service life, stable performance, and easy control of dynamic performance, but the manufacturing requirements are strict and the cost is high.
In DJM type diaphragm coupling, the periodic load is a typical load form in mechanical transmission.In order to avoid resonance, the changing frequency of the periodic load and the natural frequency of the drive shaft should be staggered.