Before installing the diaphragm elastic coupling, clean the end faces of the two shafts and check the coordination of the key grooves on the end faces; after installation, it is necessary to check all the screws for a normal operation. If it is found to be loose, it needs to be tightened. Repeat several shifts. To be sure it will not loosen.
The coupling has a corresponding torque range. When the coupling is overloaded, it will automatically disconnect to protect the machine.
The characteristic of the diaphragm coupling is a bit like a bellows coupling, in fact the way the coupling transmits torque is similar.
The plum coupling is processed by machining methods such as turning, milling, and broaching, and then undergoes overall heat treatment.
Drum gear couplings use parallel or spiral grooving systems to adapt to various deviations and accurately transmit torque. They usually have good performance and price advantages.
The function of the elastic pin coupling to transmit torque has become an important criterion for coupling selection.For standard couplings, allowable torque values have been set for each model.
After the diaphragm coupling is installed, run a shift normally, and all screws must be checked. If they are found to be loose, they must be tightened. Repeat this for several shifts to ensure that they will not loosen.
The diaphragm coupling is composed of at least one diaphragm and two shaft sleeves.The diaphragm is fastened to the sleeve with a pin and will not loosen or cause backlash between the diaphragm and the sleeve.