The assembly method of the diaphragm coupling is to check the original effect and whether the two shafts of the operating machine are aligned before assembly, whether there are wrapping paper and bruises on the surface of the two shafts, and the inner hole of the two half couplings of the coupling Can there be sundries.
The internal and external teeth of the gear coupling will wear out the teeth due to long-term use, which will affect the service life of the coupling. The reason for the matching of the teeth is that the coupling itself has no hardness.
The universal joint is composed of two single universal joints and an intermediate shaft. It can be used to realize the connection between the two shafts that are intersecting, parallel or spatially staggered to realize the movement and power between the driving shaft and the driven shaft. Of delivery.
Couplings are mechanical parts used to connect two shafts in different mechanisms so that they can rotate together to transmit torque. They are respectively connected with the driving shaft and the driven shaft.
Spiral groove type: Spiral groove type elastic coupling has a continuous multi-turn long slot. This type of coupling has particularly excellent elasticity and small bearing load.
The characteristic of the diaphragm coupling is a bit like a bellows coupling, in fact the way the coupling transmits torque is similar.
After the diaphragm coupling is installed, run a shift normally, and all screws must be checked. If they are found to be loose, they must be tightened. Repeat this for several shifts to ensure that they will not loosen.
The diaphragm coupling is composed of at least one diaphragm and two shaft sleeves.The diaphragm is fastened to the sleeve with a pin and will not loosen or cause backlash between the diaphragm and the sleeve.