HL type elastic pin couplingThe elastic pin coupling is used if...
T type plum blossom hexagonal water pump counter wheel padT-shaped plum blossom hexagonal water pump counter-wheel pad production...
Universal couplingThe universal coupling uses its mechanism...
JB type HG5-251-79 standard frameSelection of JB type HG5-251-79 standard frame...The drum-shaped tooth surface enables the contact conditions of the inner and outer teeth to avoid the disadvantages of squeeze and stress concentration at the edge of the straight tooth under the condition of angular displacement. At the same time, the friction and wear of the tooth surface are reduced, the noise is reduced, and the maintenance cycle is long. .
Alignment of the gap between the two-lobe coupling and the angular deviation.When installing, measure the gap value between the two couplings every 90°, and the difference between the large value and the small value does not exceed 0.38mm.
The serpentine spring coupling is a relatively new shaft coupling transmission component in the field of global machinery today, and it is also a particularly versatile shaft coupling transmission component.
The serpentine spring coupling embeds more than two half and thirty-six percent in the axial direction of the serpentine spring sheet.The serpentine spring leaf with trapezoidal section is made of high-quality spring steel, subjected to strict heat treatment, and specially processed.