• Explanation of Spiral Grooving of Drum Gear CouplingCast steel: Cast steel has poor mechanical properties and small applications. It is usually used to make large gears that cannot be forged,...
  • Diaphragm coupling transmission and selectionAble to withstand large fleeing, such as different types of finished parts. ...
  • Bolt connection and characteristics of diaphragm couplingThe diaphragm coupling bolt connection does not need to be threaded on the connecting piece, and the use is not restricted by the connecting piece,...
  • Coupling method and alignmentFix the magnetic fixing seat, the measuring rod and the dial indicator on the couplings of the fixed end and the movable end respectively;...
  • Compensation type and alignment method of diaphragm coupling​The misalignment forms that the diaphragm coupling can compensate include the following three basic types: angular (two-axis...
  • What you need to know when disassembling the plum blossom coupling​Before disassembling the plum blossom coupling, it is necessary to make a...
  • 江苏Rigid coupling江苏Rigid couplingThe characteristics of rigid coupling: rigid coupling...
  • 江苏HL type elastic pin coupling江苏HL type elastic pin couplingThe elastic pin coupling uses a number of non...
  • Jiangsu UL tire couplingJiangsu UL tire couplingUL tire coupling is a highly elastic coupling...
  • Jiangsu WGT type connecting middle sleeve gear coupling
    name:

    Jiangsu WGT type connecting middle sleeve gear coupling

    description:When the WGT type gear coupling is working, the two shafts produce relative angular displacement, and the tooth surfaces of the internal and external teeth periodically slide relative to each other in the axial direction, which will inevitably cause tooth surface wear and power consumption. Therefore, the gear coupling Need to work in a good and sealed state.
    Detailed introduction:

    When the WGT type gear coupling is working, the two shafts produce relative angular displacement, and the tooth surfaces of the internal and external teeth periodically slide relative to each other in the axial direction, which will inevitably cause tooth surface wear and power consumption. Therefore, the gear coupling Need to work in a good and sealed state.Gear couplings have small radial dimensions and large load-bearing capacity. They are often used in shaft transmissions under low-speed and heavy-duty conditions. The dynamically balanced gear couplings can be used for high-speed transmissions, such as gas turbine shaft transmissions.
    The drum gear coupling is composed of an inner gear ring with the same number of teeth and a flange half coupling with external teeth.The external teeth are divided into two types: straight teeth and drum teeth. The so-called drum teeth means that the external teeth are made into a spherical surface. The spherical surface is on the gear axis. The tooth side clearance is larger than that of ordinary gears. Larger angular displacement (compared to straight tooth coupling) improves the torque transmission capacity and prolongs the service life.The contact state along the tooth width when there is angular displacement.

    Gear coupling picture XNUMX
    Gear coupling picture XNUMX
    Jiangsu WGT type connecting middle sleeve gear coupling Guangdong WGT type connecting middle sleeve gear coupling 
  • 江苏NL type drum gear coupling 江苏NL type drum gear coupling The shaft hole types are cylindrical (Y),...
  • 江苏Slide coupling 江苏Slide coupling Slider couplings are often used in general...
  • Jiangsu JB type HG5-251-79 standard frame Jiangsu JB type HG5-251-79 standard frame Selection of JB type HG5-251-79 standard frame...
  • 江苏Multi-section clamping diaphragm coupling 江苏Multi-section clamping diaphragm coupling 1. Diaphragm elastic coupling...